Kayak Fishing Ultimate Resource

Monday, 01 September 2014 16:42

OR 2014 - Malone Kayak Trailers

Written by
Rate this item
(1 Vote)

Adam talks with Colin from Malone Trailers about new kayak transportation and storage options.

 

Read 2848 times Last modified on Monday, 15 September 2014 08:32
Greg Becker

About the Author: Greg Becker relocated to the Tampa Bay, FL area from upstate NY, where for 20 years he spent his spare time as a licensed hunting and fishing guide. He now enjoys fishing in places you don’t need to drill through the water in winter. Greg writes for several outdoor companies and publications in the U.S. and abroad, and is a member of the Native Watercraft Pro Staff and Bull Bay Rods Professional Team. Greg enjoys getting his eleven-year-old son Robert out fishing in salt water from his kayak, and together they volunteer with the Tampa Bay Chapter of Heroes on the Water and Operation Helping Hand at the James A Haley VA Hospital.

Social Profiles

Comments  

 
# Elkhornsun 2014-09-16 13:31
Malone's kayak trailers are the most complete with ones that are sold with the spare tire and mount, cross bars and saddles, and waterproof wheel bearings. The flaw with their design and all the other such kayak and canoe trailers is that the supports are too far above the ground to be able to launch the boats directly into the water as one would do with an inflatable or other boat. This is where Malone would do well to look at the designs for jet ski trailers.
 

Please login to post a comment.

Get the YakAngler Newsletter!

Keep tabs on all the latest from YakAngler.

Latest From The Forum

    • Detroit_Q's Avatar
    • Dragonfly 7 pro
    • Have you is what I meant. Sent from my SAMSUNG-SM-J320A using Tapatalk
    • 6 hours 57 minutes ago
    • DRH2O's Avatar
    • Taking pictures?
    • A waterproof point-and-shoot with a self-timer option mounted to your bow is a pretty good option for hero-shots. It's going to be cheaper than a...
    • 12 hours 25 minutes ago
    • Atlas918's Avatar
    • Temp rod holder
    • Quote: They are real easy to install. Really easy. Watch a couple youtube videos and you'll see. You were gonna drill a hole for the rods, next step is...
    • 14 hours 56 minutes ago
    • rustyN's Avatar
    • 3D Printing and Kayak Fishing?
    • Quote: Try and make a scupper vent. ( a valve that will allow water out but not in) . There are few dyi , PVC ways to do it, but this would be more "...
    • 15 hours 7 minutes ago

More Topics »