Kayak Fishing Ultimate Resource

Old Town "Loon 106 Angler"

Old Town "Loon 106 Angler" Hot

0.0 (0)
1774   1   1   0   0
Write Review
The New Old Town Loon - Designed to Perform, Built to Last

Kayak Make & Model

Old Town
Loon 106 Angler
MSRP ($):
Length (ft):

The Loon 106 Angler is one of the brand new re-engineered versions of their classic Loon kayak. As the name suggests, it is a fishing-specific model and according to Old Town it is one of the most comfortable sit-inside angling kayaks on the market. This is thanks to their Active Comfort System 2.0 seat, which not only looks good, but provides plenty of comfort out on the water. Adjusting the seat is easy and intuitive while it also offers premium padding, under-leg support and flow-through ventilation. It is made from mesh fabric that is quick-drying, so if it does get wet it won’t take ages to dry out again.

Anglers familiar with the original Loon will immediately notice the sleek new hull design of the Loon 106 Angler. It features extra width and volume, so it is more stable while still packing all the essentials such as a drain plug, paddle clip, bow and stern carry handles, as well as bow and stern deck bungees. A stand-out feature of this kayak is the smart workdeck that is positioned at arms reach and packed with a cup holder, water bottle cage mount, accessory trays and large storage compartment. It even features a USB port for electronics like phones, GPS units and cameras. While handy, the workdeck can also detach easily for those times when you really need the extra space.

Rounding out the Loon 106 Angler is an anchor trolley system, support track foot brace system and click seal hatch with bulkhead. Fans of the original Old Town Loon kayaks as well as anyone looking for a nice all-rounder on the water will appreciate the Loon 106 Angler.



User reviews

There are no user reviews for this listing.
Already have an account?
Ratings (the higher the better)
User Info
Pros & Cons

Get the YakAngler Newsletter!

Keep tabs on all the latest from YakAngler.

Latest From The Forum

    • aeds151's Avatar
    • Wireless trolling motor repair
    • I paid well over $100 for the system. I hate to have to just buy a whole other unit. I emailed the company saturday with a reply that night that ot...
    • 8 hours 30 minutes ago
    • matash's Avatar
    • trident 15 and transducer size
    • I know the elite hdi transducers fit nicely. so you can run elite 4 hdi to elite 9 hdi You can use the Lowrance scupper mount or figure out a...
    • 9 hours 42 minutes ago
    • basscatlildave's Avatar
    • I always thought one over the side would get in my way. I glued it to the inside bottom on the Cuda 12 I had and it worked just fine.
    • 12 hours 28 minutes ago
    • Clay's Avatar
    • sun dophin boss 12 ss
    • Congrats on your new boat. Make sure you get a PFD and all of the other required safety stuff in your state, then get it wet and put some fish slime...
    • 1 day 12 hours ago

More Topics »